Some of the mistakes made when applying car wrapping Dubai include bubbles, wrinkles, and misalignment. Also, make sure that the surface of the vehicle is properly washed so that dirt does not destroy the wrap. There are several things to note when using a squeegee, the material has to be spread correctly and the environment has to be dust-free. The above steps will help avoid common mistakes in car wrapping and make your car look well-done and professional.
Neglecting Surface Preparation
As any professional knows, before beginning the car wrapping in Dubai it is necessary to prepare the surface of the car properly by washing it. The presence of dirt, dust or grease will mean poor adhesion and this results in the formation of bubbles or peeling. It is also important that the surface is clean and dust-free and there is no moisture present.
Ignoring Temperature and Humidity
It is therefore very key to understand that the environment where one applies the wrap has a very big influence on its success. It is recommended to store at temperatures between 60-80° F or 15- 27° C and low humidity. Weather conditions may have an impact on the adhesive which would split, tear and compromise the look of the wrap.
Improper Alignment
If the wrap is misaligned, this results in the development of seams and an uneven coverage is likely to happen. To begin with, make sure that the piece is well placed and only then can you proceed to cutting it. The best way of doing this is by using reference points on the vehicle to align the laser properly.
Using Incorrect Tools
This includes the choice of the appropriate materials, a good squeegee as well as an infrared heat gun. Do not use improvised tools as they will either spoil the wrap or the paint of the automobile.
Rushing the Application
Do not rush when applying, especially if you’re applying for a scholarship. Sometimes when hurried then there may be an occurrence of things such as trapped air bubbles or creases. Make sure that every segment of the wrap sticks properly by doing it systematically especially on the roof part.
Overstretching the Material
If the wrap is stretched too far this results in distortion of the adhesive and also makes it weak. When applying the wrap ensure that you do not apply too much pressure which will cause the wrap to stretch as it follows the curves of the vehicle.
Bottom Line
The following are the mistakes to disregard when practising car wrapping in Dubai: Thus, carefully examining surface preparation, environmental conditions, alignment, tools, and application techniques, you will be able to create a high-gloss, mechanically durable wrap to improve the aesthetics of your vehicle.
